RRP: £2699.99


Built around our new 155mm travel suspension platform, the new Sommet VRX is the ideal bike to take on your next enduro ; hammering technical descents; ascending with finesse; finding your limits long before you reach the limits of the all NEW Sommet! When performance and reliability are top of your list; get onboard the new Vitus Sommet VRX and claim your place on the top of the podium!
The Sommet VRX features a Marzocchi 350 NCR fork; SRAM X1 groupset with Shimano SLX hydraulic disc brakes; RockShox Reverb stealth dropper seatpost; WTB/Formula wheelset and a Funn/Vitus cockpit to complete the package.

155mm Travel V-Link 27.5” Frame 
Our 2015 Sommet frame has been completely re-designed from the ground up! Following a lengthy period of R&D we have taken the best attributes from our award winning Escarpe platform and applied this to the new Sommet platform where we fine tuned the linkage positions and leverage ratios to obtain the desired axle path we required.
The new Vitus platform features a floating horizontal shock mount (FHSM) and actual main pivot location (AMPL) designed to provide the most efficient pedalling and suspension action. This layout requires the shock to interrupt the seat-tube; our solution to this is our two-piece hollow “Clamshell” chainstay yoke which is both light and stiff.
The main pivot location is located in a fixed high and forward position in line with a 32T chain ring position, this gives natural anti squat/bob when pedalling in the most commonly used 1x 32T setup without relying on excessive chain tension and none of the related pedal feedback. Because of the main pivot location the Sommet has 55mm of travel with a rearward axle path helping to keep your momentum.
The chainstay pivot location is placed in-line with the chainstay eliminating any force directed to the shock linkage causing the shock to compress (aka pedal bob) due to chain tension. This pivot location also maximizes active suspension when using the rear brake similar to a floating brake design – but without the added weight.
The leverage rate is designed to have a falling rate to sag point then go mildly progressive; this helps the bike sit comfortably in the sag position whilst also providing a stable platform. The lower shock mount moves forward with the suspension, this helps to keep a linear rate without falling off at full travel. This movement also reduces the shock angle change at full travel reducing side loads and improving shock life and reliability.

Manufactured from 6061-T6 triple butted aluminium and delivering 155mm of fully active suspension travel via the Horst-Link 4-bar design with our horizontal floating shock mount.
We have added a removable High Direct FD mount and ISCG-05 tabs to facilitate any drivetrain combination. The rear axle is the now industry standard 142mm x 12mm E-Thru platform.
The frame is also Reverb Stealth ready thanks to the internal cable routing.
A bolt on down tube protector adds impact resistance to the down tube and cables from rock strikes.

Rear wheel travel is controlled via the RockShox Monarch Plus Debon Air custom tuned shock which features external rebound and three position compression damping adjustment.



FrameHydroformed 6061-T6 Aluminium
ForksMarzocchi 350 NCR
ShockRockShox Monarch Plus RC3 DebonAir
ChainsetSRAM X1 1000
Bottom BracketSRAM
ShiftersSRAM X1
Front Derailleurn/a
Rear DerailleurSRAM X1
CassetteSRAM X1
ChainSRAM X1
RimsWTB Frequency Team i23 TCS
Front HubFormula
Rear HubFormula
Front BrakeShimano SLX BR-M675
Rear BrakeShimano SLX BR-M675
HandlebarsVitus Riser Bar
StemFunn Strippa
HeadsetFSA Orbit 1.5
SeatpostRockShox Reverb Stealth
SeatclampVitus QR
Weight13.5kg/29.80lbs (size M)


Size Small Medium Large X-Large
Rec. Rider Height 5’0″ – 5’7″ 5’7″ – 5’11” 5’11” – 6’3″ 6’3” – 6’7”
Rec. Rider Height 152cm – 170cm 170cm – 180cm 180cm – 190cm 190cm – 201cm
Rec. Inside Leg 26″ – 30″ 30″ – 32″ 32″ – 34″ 34” – 37”
Rec. Inside Leg 66cm – 76cm 76cm – 81cm 81cm – 86cm 86cm – 94cm
Seat Tube 382 433 483 523
(A) Effective Top tube 575 600 620 640
(G) Reach 408.74 433.74 451.03 468.33
(F) Stack 595.04 595.04 604.18 613.31
(D) Chainstay 435mm 435mm 435mm 435mm
(E) Head Tube 110mm 110mm 120mm 130mm
(B) Head Tube Angle 65.5˚ 65.5˚ 65.5˚ 65.5˚
(C) Effective Seat Tube Angle 74.5˚ 74.5˚ 74.5˚ 74.5˚
Bottom Bracket Drop 10mm 10mm 10mm 10mm
Wheelbase 1152.45mm 1177.45mm 1198.8mm 1220.17mm
Seat Post Diameter 31.6mm 31.6mm 31.6mm 31.6mm
Headset ZS44/56 ZS44/56 ZS44/56 ZS44/56
Rear Axle 12mm x 142mm E Thru 12mm x 142mm E Thru 12mm x 142mm E Thru 12mm x 142mm E Thru
Frame Material 6061-T6 Alloy 6061-T6 Alloy 6061-T6 Alloy 6061-T6 Alloy
Based on Axle to Crown 550mm 550mm 550mm 550mm


Other Sommet Models

Previous Models

2011 | 2012 | 2013 | 2014 | 2015 | 2016 | 2017 | 2018
| 2019